This two-piece receiver-pin set is listed for the Milsig/Valken M17HC and is also confirmed by the product record for the newer M17 G3. The confirmation applies to these receiver pins; it does not make every older M17HC component interchangeable with every G3 part.
What you receive
The package contains two receiver pins. No receiver shell, detent, spring or other surrounding hardware is listed as included, so retain or separately identify every required original component before beginning service.
Compare both replacement pins with the current product images and the removed originals. A similar diameter alone is not enough if groove, head or retention geometry differs.
Why the generation statement matters
The product description expressly includes both M17HC and M17 G3 for this part. That is stronger evidence than assuming fit from the shared M17 name, and it should remain limited to this exact receiver-pin product.
Other M17 service parts can have different generation boundaries. Check each component individually rather than transferring this receiver-pin compatibility to a latch, regulator or stock adapter.
View the exact receiver-pin set
Milsig / Valken M17 HC / Receiver Pins 2pcs.
Why it belongs: The exact two-pin set is explicitly confirmed for both M17HC and M17 G3.
Decision boundary: That cross-generation fit applies only to these receiver pins.
View the Receiver PinsReplacement checklist
- Confirm the marker is an M17HC or M17 G3 named by the listing.
- Verify that receiver-pin wear or loss is the actual service need.
- Inspect the receiver holes and retention features for damage.
- Keep the marker unloaded and depressurized.
- Follow the current model-specific disassembly and function-check procedure.
Keep the repair boundary clear
Receiver pins retain receiver components; they do not repair regulator leaks, feeding faults or worn magazine parts. If the pin repeatedly moves or binds, inspect the surrounding receiver geometry instead of forcing the replacement.
For another generation-sensitive M17 part, see the M17 magazine-latch guide.
The buying decision
Choose this two-pin set when the exact M17HC or M17 G3 receiver-pin replacement is confirmed. Keep all other generation compatibility questions separate until the specific part record answers them.
Related M17 platform context
Related M17 platform context
This Z-RAM video includes the M17/VKS platform in a .68 setup. It is general platform context only and does not demonstrate the receiver pins or prove generation fit.
Watch the Z-RAM videoMore Z-RAM products to explore
These products are shown as separate options or related project context. Check each product page and do not infer compatibility or package contents from proximity alone.
Valken M17 CQC Front Shroud Handguard (Universal!)
Why it belongs: This active M17 front-shroud option is a related receiver-area product for owners planning a separate front-end project.
Decision boundary: It is not included with the two receiver pins and its availability does not prove the pin dimensions or fit for every M17 generation.
View the M17 Front ShroudImportant Legal Notice
Laws and regulations governing the purchase, possession, installation, modification, and use of the products described on this page vary by country, state, and local jurisdiction and may change. Before purchasing, installing, modifying, or using any product, you are responsible for confirming that it is permitted in your location and for your intended purpose. Product availability or delivery does not mean that purchase, possession, installation, modification, or use is lawful in your jurisdiction. Z-RAM does not provide legal advice, and the information on this page must not be treated as legal advice. If you are unsure, contact the competent local authority or a qualified legal professional.