This product is a five-pack of replacement magazine springs for Valken M17, M5, GMAG and CQMF magazines. The springs provide the replacement feed-pressure component only; magazine shells, followers and other hardware are not included.
Confirmed package and magazine scope
The listing supplies five high-tension steel springs and names M17, M5, GMAG and CQMF magazines. The compatibility belongs to those magazine families, not automatically to every marker that can accept one of them.
Before ordering, identify the magazine itself and compare the original spring path, follower and retention points. A marker model name is not a substitute for the exact magazine version.
When a spring is the likely service part
A spring can be considered when inspection shows loss of tension, deformation, corrosion or damage along the feed path. Feeding trouble can also come from a dirty channel, damaged follower, shell distortion or unsuitable projectiles, so diagnose the magazine before replacing parts.
The five-pack is useful for maintaining several confirmed magazines or retaining spares. It should not be read as an instruction to combine springs or increase tension beyond the intended single-spring arrangement.
View the exact five-pack
Valken M17 Magazine Spring - 5 pieces
Why it belongs: The five-pack contains the exact replacement feed springs for the named magazines.
Decision boundary: Magazine shells, followers and other hardware are not included.
View the Magazine SpringsControlled replacement checks
- Confirm M17, M5, GMAG or CQMF magazine identity.
- Record the original spring orientation and routing.
- Inspect the follower and feed channel before fitting a new spring.
- Use the current magazine service instructions.
- Function-check the empty magazine before adding suitable projectiles.
Keep magazine and marker repairs separate
These springs address a magazine feed component. They do not repair a regulator, receiver or marker-side air problem, and they do not include the magazine shell. Separating the symptom by subsystem prevents unnecessary parts purchases.
The M17 mag-latch guide covers the marker-side retention part for older M17 models and has a different generation boundary.
The purchase decision
Choose the five-pack when the exact named magazine family and worn spring are confirmed. Pause when the magazine identity or failure point is still uncertain.
Related M17 feed and ammunition context
Related M17 feed and ammunition context
This Z-RAM video includes the M17/VKS feed ecosystem in a wider ammunition discussion. It does not demonstrate spring replacement or confirm a particular magazine variant.
Watch the Z-RAM videoMore Z-RAM products to explore
These products are shown as separate options or related project context. Check each product page and do not infer compatibility or package contents from proximity alone.
Valken M5 / M17 Hybrid Mag Connector / magazine connector - black
Why it belongs: The hybrid magazine connector is a related feed-system component when the service need concerns the connector rather than spring force.
Decision boundary: It is not part of the five-spring package and should not be added unless the connector is separately required.
View the Hybrid Magazine ConnectorImportant Legal Notice
Laws and regulations governing the purchase, possession, installation, modification, and use of the products described on this page vary by country, state, and local jurisdiction and may change. Before purchasing, installing, modifying, or using any product, you are responsible for confirming that it is permitted in your location and for your intended purpose. Product availability or delivery does not mean that purchase, possession, installation, modification, or use is lawful in your jurisdiction. Z-RAM does not provide legal advice, and the information on this page must not be treated as legal advice. If you are unsure, contact the competent local authority or a qualified legal professional.