Yes—the Milsig/Valken M17HC receiver-pin set is also listed for the M17 G3. You receive two receiver pins. If you are buying for a G3, the M17HC name on this particular offer does not rule it out.
Receiver pins or a magazine-latch replacement?
Start with the component you need. The pin set supplies two receiver pins, while the separate M17 Mag Latch Kit supplies a magazine latch and its spring. These are different replacement purchases, despite both packs containing two pieces.
The latch kit also has a narrower generation scope: it is for older Milsig M17 models and excludes the newer M17 G3. The comparison makes the distinction clear.
| Replacement offer | Supplied parts | M17 G3 position |
|---|---|---|
| M17HC Receiver Pins | Two receiver pins | Explicitly included |
| Older-M17 Mag Latch Kit | One magazine latch and one latch spring | Explicitly excluded |
Why the two fit answers can differ
M17 identifies the family, but each component has its own fit. A pin set can cover M17HC and M17 G3 without every older-model latch fitting the G3 as well. The latch restriction therefore should not stop you from choosing the confirmed pin set, and the pin set's wider fit should not lead you to buy that latch for a G3.
This is especially useful when replacing several small parts together. Keep “receiver pins” and “magazine latch” as separate entries on the order, with the model or generation for each. A matching brand name and a two-piece quantity cannot replace that part-specific choice.
Choose the offer for the actual replacement
For receiver-pin replacement on either named version, the two-pin set is the relevant offer. The latch kit below is a comparison for an older-M17 latch repair, not an extra required purchase with the pins.
For a larger shopping list, the guide to choosing compatible Z-RAM parts explains how to separate required parts, optional items and alternatives.
Two different M17 replacement-part choices
Milsig / Valken M17 HC / Receiver Pins 2pcs.
The two-piece receiver-pin set for Milsig/Valken M17HC, also expressly listed for M17 G3. Choose this offer for the receiver pins discussed above.
View the receiver-pin set
Milsig / Valken M17 Mag Latch Kit for M17 Magwell
A separate older-M17 replacement choice: one magazine latch and one latch spring. This kit does not fit the newer M17 G3; its generation coverage differs from the pins.
Compare the older-M17 latch kitGeneral Z-RAM viewing: the product categories
For a broader look around Z-RAM after this parts comparison, the first short introduces the shop's own-brand categories. It is general viewing, separate from the M17 generation-fit answer.
▶ Play on YouTubeThe Ultimate Shop for RAM Tuning Parts: Ammo, Valves, Chambers, and More HDR50 TR68 FSC TCP
Channel: Z-RAM
General Z-RAM viewing: other supported marker families
This companion introduction focuses on the shop's wider model range, including Umarex T4E and FSC/TCP, for readers browsing parts for other markers too.
▶ Play on YouTubeFind the Best Umarex T4E Parts at Z-Ram.net . HDR68 TR50 HDP50 TS68 Pepperball First Strike
Channel: Z-RAM
Important Legal Notice
Laws and regulations governing the purchase, possession, installation, modification, and use of the products described on this page vary by country, state, and local jurisdiction and may change. Before purchasing, installing, modifying, or using any product, you are responsible for confirming that it is permitted in your location and for your intended purpose. Product availability or delivery does not mean that purchase, possession, installation, modification, or use is lawful in your jurisdiction. Z-RAM does not provide legal advice, and the information on this page must not be treated as legal advice. If you are unsure, contact the competent local authority or a qualified legal professional.