New 10g Version !
Z.68v2 10g Bullets
Also suitable for the VKS, Umarex HDS68, HDR68 and Valken M17, T15, Spyder, etc...
The Z-Ram Less Lethal Self Defense Projectiles Z68 can be used with most .68 caliber markers whose barrels are equipped with a bore size of .686 and higher (0.69 recommended) . But were primarily developed for the Tiberius First Strike FSC-T8.1 or T9.1. Due to the typical First Strike Ready Form (FSR or D-Form), it is necessary that magazines and markers are also FSR-Ready.
The CNC manufactured bullets made of polished steel in caliber .686 have an enormous effect on the target thanks to their high weight of 10 grams, a tapered shape and a very small impact surface. The entire impact energy is concentrated at the steel tip! These projectiles are particularly suitable for target shooting or home and self-defense. The Z68 projectiles must not be used for paintball games or against people or animals without authorization.
Features:
- Absolutely unique pointed steel projectiles with a very small impact area for an enormous effect on the target! The entire impact energy is concentrated at the steel tip!
- High quality and precise CNC machined steel projectile for Cal. .68 markers
- Bore size: 0.686 (Diameter of the Z.68v2 = 17.35mm)
- Compatible with cal. 686 barrels and higher, e.g .: 0.686, 0.690 (0.69 recommended)
- Compatible only with FSR-capable markers and magazines such as: First Strike FSC-T8.1 or T9.1 pistols
- reusable! Since it is made of steel, it is almost indestructible or malleable! No bursting or breaking as with plastic or copper / nylon mixtures!
- Individual weight per apiece: 10g
Scope of delivery:
- 6 piece Z.68v2 10g steel projectiles
Application advice (very important!):
It is absolutely necessary to grease the projectiles, the barrel and the magazine well.
Be sure to use our MagMode for better projectile pickup in the barrel.
For barrels with a bore below 0.690, the first projectile that is loaded into the magazine should be loaded horizontally and thus only serves to bring the following projectiles into the correct position. The horizontal projectile cannot then be fired.. The stronger, red magazine spring supplied with the FSC, T9, T8 should be used. The magazine, barrel and bullet should always be well oiled. The Z.68 projectiles should not be combined with other projectiles or even round bullets in the magazine.
Safety instructions (more importantly!):
These projectiles may only be used in extreme emergencies or for target practice and not for paintball. There is a very high risk of injury. Please make sure when setting your marker and using it in Germany - be it in Grimburg, near the Luxembourg border, or in Hamburg in the far north - that you do not exceed the legally permitted 7.5 Joules. Liability of any kind is excluded. Sales only from 18 years! (Keywörter): KIP - Self / Home Defense ? Kinetic, HomeWreker, Wreking Ball, Bullet, Paintballs, Paintball, slug, slugs, hartgummi, Glasbrecher, Glass Breaking, Rubber balls, Monition oder auch Geschosse genannt, für Tiberius First Strike, Umarex - T4E - Verwendbar von riot de janeiro bis Grimburg für Magfed und Paintball.
We have many other interesting tuning parts and ammunition for your marker!
Check out our collection and choose your marker.
Collections
Application and Safety Instructions for Paintball and RAM Products
Responsible Entity
Daniel Lovrencic
Andalo UG (limited liability)
Pfarrer-Bergmann-Str. 37
55127 Mainz, Germany
Commercial Register Number: HRB 51460
VAT Identification Number: DE354752888
Application and Safety Instructions for Paintball and RAM Spare Parts and Accessories
Application Instructions
-
Installation and Use: These spare parts and accessories are specifically designed for maintenance and replacement in Paintball and RAM markers. Ensure that the parts are installed properly, either by a professional or following the manufacturer's instructions.
-
Check Compatibility: Verify that the spare parts and accessories are compatible with your marker model to ensure proper functionality.
-
Storage: Keep spare parts and accessories dry and clean to prevent corrosion and damage. Direct sunlight and high humidity can affect material quality.
Safety Instructions
-
Protective Gear: Always wear appropriate protective gear, such as gloves and safety glasses, when installing spare parts to prevent injuries.
-
Regular Inspection: Regularly check the condition of spare parts and accessories to ensure all components are intact and operational.
-
Use According to Regulations: Use spare parts and accessories only in areas where their use is permitted, and comply with legal requirements for Paintball and RAM equipment.
-
Proper Disposal: Dispose of defective or worn-out parts properly and in an environmentally friendly manner.
Application and Safety Instructions for Paintball and RAM Ammunition
Application Instructions
-
Usage: This ammunition is specifically designed for use in Paintball and RAM (Real Action Marker) markers. Ensure that the ammunition is suitable for your marker and matches the specified caliber measurements.
-
Check Compatibility: Before use, verify that your marker supports the specific caliber and that all components are properly assembled to avoid jamming or damage.
-
Storage: Store ammunition in a dry and clean area to prevent rust and damage. Direct sunlight and high humidity can affect quality.
Safety Instructions
-
Protective Gear: Always wear appropriate protective gear, including safety glasses and gloves, to avoid injuries from ricochets or malfunctions.
-
Do Not Aim at Living Targets: This ammunition is not intended for use on living targets and can cause serious injuries. Use it only in controlled environments and never near people or animals.
-
Regular Maintenance: Clean the barrel and magazines regularly to prevent buildup that could block the marker or cause malfunctions.
-
Use in Approved Areas: Use ammunition only in areas where its use is permitted and adhere to legal regulations concerning Paintball and RAM equipment.
Application and Safety Instructions for Paintball and RAM Performance Components
Application Instructions
-
Installation and Use: These performance components are specifically designed to optimize the performance of Paintball and RAM markers. Ensure that the parts are installed by a professional or that you have the necessary expertise to safely mount them.
-
Check Compatibility: Verify that the performance components are compatible with your marker model to avoid malfunctions or damage.
-
Storage: Keep performance parts dry and clean to prevent corrosion and wear.
Safety Instructions
-
Use According to Regulations: Observe the legal requirements for the use of performance components in Paintball and RAM markers, as performance enhancements may be subject to specific regulations.
-
Protective Gear: Always wear appropriate protective gear, such as gloves and safety glasses, during installation and use to avoid injuries.
-
Regular Maintenance: After installing performance components, regular maintenance of your marker is required to ensure optimal performance and safety.
-
Use Only in Approved Areas: Use markers with performance components only in areas where permitted and comply with specific safety regulations for Paintball and RAM equipment.