Z-RAM’s earlier Z.68v2 presentation explains the rounded side profile as a way to reduce the surface contacting the barrel and the chance of catching in the barrel or magazine. Daniel states that the weight remains 8.5 g, the same as the predecessor discussed in the comparison. The change being explained is therefore the projectile’s profile, not a move to a heavier weight.
The side profile has a job beyond identifying the version
In the comparison, the presenter points to the larger side area of the earlier Z.68 design and the smaller contact area of v2. He links the curves to less friction and easier passage through the relevant barrel and magazine. That is Z-RAM’s stated design rationale for the rounded sides—not simply a cosmetic difference visible in a product photograph.
The useful distinction is between the whole projectile shape and the portions that meet surrounding surfaces. Two projectiles can carry the same weight label while presenting different side profiles. A shared 8.5 g specification does not tell you whether their contact surfaces are the same.
The film explains that intended benefit qualitatively. It does not give a measured friction coefficient, a percentage reduction or a controlled before-and-after failure rate. The design explanation should not become a promise that every feeding problem disappears.
Sides, rear cup and chamfer are separate features
A second Z-RAM introduction, this time for the 10 g Z.68v2, calls out the rear cup and a chamfer as well as CNC-machined stainless steel. The presenter connects the rear cup with the gas acting on the projectile and describes the chamfer as a flight-stabilization feature. Those comments concern that 10 g presentation; they are not a measured aerodynamic comparison with the earlier 8.5 g sample.
This helps make product descriptions easier to read: rounded sides describe the side profile, a rear cup describes the back, and a chamfer describes another shaped edge or transition. They are not three names for an increase in projectile weight.
What the current v2 offers confirm
The current 8.5 g and 10 g listings both describe solid CNC-machined steel, an FSR-style D-form and a stated diameter of 17.35 mm. Their different weight labels identify two current v2 offers; the historical same-weight comparison was between the earlier design and the 8.5 g v2 shown in that film.
Keep that comparison separate from v2 versus v3. The Z.68v2 and Z.68v3 identification guide addresses the later version names. Here, the added information is why Z-RAM changed the side profile and how that differs from changing mass or describing the rear geometry.
These are solid-metal projectiles, not paintballs for paintball games. A shape explanation also does not extend the exact product’s compatibility to an unlisted feed system.
Current v2 offers with separate stated weights
6x Z.68v2 8.5g Z-RAM Steel Bullets cal 0.68 FSC HDS68 HDR68 VKS TR68 TC68 Intrubuster Gen2
The current 8.5 g Z.68v2 offer: six solid CNC-machined steel projectiles with the listed FSR-style D-form and 17.35 mm diameter. This is the weight discussed in the historical side-profile comparison.
View 8.5 g Z.68v2
6x Z.68v2 10g Z-RAM Steel Bullets cal 0.68 FSC HDS68 HDR68 TR68 TS68 TC68 Intrubuster Gen2
The separate 10 g Z.68v2 offer. Its current description identifies polished solid steel and D-shaped form; the second film discusses its rear cup and chamfer.
View 10 g Z.68v2The original explanation of the rounder side profile
Daniel compares the earlier Z.68 design with the 8.5 g v2 and explains the intended contact and friction difference. The spoken comparison, rather than the version suffix alone, supplies the answer here.
▶ Play on YouTube😯 Presentation new Z-RAM Z.68v2 Bullets for FSC T9.1 T8.1 TCP HDX HDR .68 (English Translation 2021)
Channel: Z-RAM
Different features at the rear of the 10 g projectile
The short names the rear cup and chamfer of the 10 g v2, giving a separate feature-level explanation. It is not an independent friction test of the two historical 8.5 g designs.
▶ Play on YouTube🚀 www.Z-RAM.net 🚀 Discover the Z.68v2 10g steel projectiles for cal. 68 less lethal paintball gun 😎
Channel: Z-RAM
Important Legal Notice
Laws and regulations governing the purchase, possession, installation, modification, and use of the products described on this page vary by country, state, and local jurisdiction and may change. Before purchasing, installing, modifying, or using any product, you are responsible for confirming that it is permitted in your location and for your intended purpose. Product availability or delivery does not mean that purchase, possession, installation, modification, or use is lawful in your jurisdiction. Z-RAM does not provide legal advice, and the information on this page must not be treated as legal advice. If you are unsure, contact the competent local authority or a qualified legal professional.